Original 1953 Harry Bertoia Diamond Chair for H. G. Knoll Products
About the Item
- Creator:Harry Bertoia (Designer)
- Design:
- Dimensions:Height: 30.25 in (76.84 cm)Width: 34 in (86.36 cm)Depth: 28 in (71.12 cm)Seat Height: 16 in (40.64 cm)
- Style:Mid-Century Modern (Of the Period)
- Materials and Techniques:
- Place of Origin:
- Period:
- Date of Manufacture:1953
- Condition:Wear consistent with age and use. Minor fading. inside foam cushioning is hardened.
- Seller Location:Las Vegas, NV
- Reference Number:1stDibs: LU1195213159301
Diamond Chair
To fully understand the design of Harry Bertoia’s (1915–78) 1952 Diamond chair — an austere and photogenic work of woven steel wire, the intricately sculptural wings of which create the illusion of sitting on air — it helps to go back to his college days: In 1937, the Italian-born artist and designer, who emigrated to Detroit at age 15, earned a scholarship to Cranbrook Academy of Art, the illustrious Michigan design school that attracted such luminaries as Florence Knoll, Eero Saarinen and Charles and Ray Eames. Bertoia was deeply influenced by the Eameses, especially by the sculptural quality that was so prominent in the furniture they made. In the 1940s, he left Cranbrook to work for the couple, developing the molded plywood furniture that would become a trademark of their designs.
Bertoia learned to weld while employed by the Eameses, but left their workshop in anger over the lack of credit he received for the important contributions he made there — a dispute that would come to play an important role in the Diamond chair’s development. He eventually took a job at an electronics lab, where he analyzed human mobility for the purpose of designing electronics with easy-to-reach knobs and consoles.
When his former Cranbrook classmate Florence Knoll tapped Bertoia to make furniture for the Pennsylvania company she had recently founded with her husband, Hans, the designer was swayed with the promise of full credit for designs he produced. Armed with a newly minted background in ergonomics as well as the knowledge he gathered from experimentation with the Eameses, Bertoia capably applied what he’d learned over the years at Knoll, where he utilized thin wires of welded metal to produce pieces that appeared to be floating in the wind — yet remained surprisingly comfortable and supportive. The Diamond chair, a widely revered component of the innovative metal furniture line that Bertoia designed at the company, has been in continuous production at Knoll since 1952 and is available in four finishes today.
Harry Bertoia
Sculptor, furniture and jewelry designer, graphic artist and metalsmith, Harry Bertoia was one of the great cross-disciplinarians of 20th-century art and design and a central figure in American modernism. Among furniture aficionados he is known for the wire-lattice Diamond chair (and its variants such as the tall-backed Bird chair) designed for Knoll Inc. and first released in 1952. As an artist, Bertoia is revered for a style that was his alone. Bertoia’s metal sculptures are by turns expressive and austere, powerful and subtle, intimate in scale and monumental. All embody a tension between the intricacy and precision of Bertoia’s forms and the raw strength of his materials: steel, brass, bronze and copper.
Fortune seemed to guide Bertoia’s artistic development. Born in northeastern Italy, Bertoia immigrated to the United States at age 15, joining an older brother in Detroit. He studied drawing and metalworking in the gifted student program at Cass Technical High School. Recognition led to awards that culminated, in 1937, in a teaching scholarship to attend the Cranbrook Academy of Art in suburban Bloomfield Hills, one of the great crucibles of modernism in America. There, Bertoia made friendships — with architect Eero Saarinen, designers Charles and Ray Eames and Florence Schust Knoll and others — that shaped the course of his life. He taught metalworking at Cranbrook, and when materials rationing during World War II limited the availability of metals, Bertoia focused on jewelry design. He also experimented with monotype printmaking, and 19 of his earliest efforts were bought by the Guggenheim Museum.
In 1943, he left Cranbrook to work in California with the Eameses, helping them develop their now-famed plywood furniture. (Bertoia received scant credit.) Late in that decade, Florence and Hans Knoll persuaded him to move east and join Knoll Inc. His chairs became, and remain, perennial bestsellers. Royalties allowed Bertoia to devote himself full-time to metal sculpture, a medium he began to explore in earnest in 1947.
By the early 1950s Bertoia was receiving commissions for large-scale works from architects — the first came via Saarinen — as he refined his aesthetic vocabulary into two distinct skeins. One comprises his “sounding sculptures” — gongs and “Sonambient” groupings of rods that strike together and chime when touched by hand or by the wind. The other genre encompasses Bertoia’s naturalistic works: abstract sculptures that suggest bushes, flower petals, leaves, dandelions or sprays of grass. As you will see on these pages, Harry Bertoia was truly unique; his art and designs manifest a wholly singular combination of delicacy and strength.
- ShippingRetrieving quote...Ships From: Las Vegas, NV
- Return PolicyA return for this item may be initiated within 3 days of delivery.
- Mid-Century Saarinen for Knoll Executive Armless Chairs. set of 4, dated 1963By Eero SaarinenLocated in Las Vegas, NVSet of 4 early Eero Saarinen design armless executive chairs from 1963. Manufactured by Knoll International. Deep red wool upholstery. Brushed aluminum legs. One has an aluminum plat...Category
Mid-20th Century American Mid-Century Modern Lounge Chairs
MaterialsAluminum
- 1970s Lounge Chairs by Byron Botker for Landes of CaliforniaBy Byron BotkerLocated in Las Vegas, NVPair of fat chrome-plated steel tube sling lounge chairs designed by Byron Botker for Landes of California. Very comfortable and super cool. New premium vinyl sling in 2-tone steel ...Category
Vintage 1970s American Mid-Century Modern Lounge Chairs
MaterialsSteel
- Vintage Scoop Cantilever Lounge Chairs 1970'sBy Milo BaughmanLocated in Las Vegas, NVAmazing 1970s Disco era green velvet cantilever lounge chairs Newly upholstered with new inside webbing and Dacron. Very comfortable scoop design.Category
Mid-20th Century Mid-Century Modern Lounge Chairs
MaterialsSteel
- Wabi Sabi Burlwood, Iron and Bronze Lounge ChairsBy Werkstätte Carl AuböckLocated in Las Vegas, NVAn amazing pair of massive Sabino burl wood lounge chairs. Legs are hand formed of thick wrought iron with large bronze ball feet. Comfortable laid back chairs, very heavy and solid....Category
Mid-20th Century Mid-Century Modern Lounge Chairs
MaterialsBronze, Wrought Iron
- 1970s MOD Yellow Velvet Swivel Lounge ChairsBy Milo BaughmanLocated in Las Vegas, NVA pair of petite swivel lounge chairs designed in the style of Milo Baughman. We just had them professionally reupholstered in a canary yell...Category
Vintage 1970s Mid-Century Modern Lounge Chairs
MaterialsUpholstery, Wood
- 1950s Mid-Century Modern Lounge Chair PairBy Edward WormleyLocated in Las Vegas, NVIncredible pair of 1950s Mid-Century Modern lounge chairs that are newly upholstered in Fine butter soft chocolate brown faux leather. They are in the style of Edward Wormley. Not ...Category
Vintage 1950s Mid-Century Modern Lounge Chairs
MaterialsUpholstery, Wood
- Harry Bertoia for Knoll Diamond Chair - ChromeBy Harry BertoiaLocated in Kennett Square, PAChrome diamond chair designed by Harry Bertoia for Knoll - a mid century classic, appears to be fairly recently made. Black leather seat highlights the striking chrome. Always surpri...Category
21st Century and Contemporary American Mid-Century Modern Lounge Chairs
MaterialsChrome
- Harry Bertoia for Knoll Large Diamond ChairBy Harry Bertoia, KnollLocated in Philadelphia, PAHarry Bertoia for Knoll large diamond chair with a green cover. Base is original white. Bushings are in good shape, and overall the cover is pretty clean! ...Category
Vintage 1970s American Mid-Century Modern Lounge Chairs
MaterialsMetal
- Harry Bertoia for Knoll ”BIRD” ChairBy Knoll, Harry BertoiaLocated in Philadelphia, PAHarry Bertoia Bird Frame or High Back Diamond. Black metal frame with 4 rubber bushings that let that chair rock slightly. Newer Knoll cover in the last 10-15 years. Cover is very...Category
Vintage 1960s American Mid-Century Modern Lounge Chairs
MaterialsMetal
- Harry Bertoia for Knoll Large Chrome Diamond ChairBy Knoll, Harry BertoiaLocated in Ferndale, MIHarry Bertoias concept of woven welded steel wire was to present a chair appearing lighter than air. This is the large diamond chair from his wire ser...Category
Mid-20th Century Mid-Century Modern Lounge Chairs
MaterialsSteel, Chrome
- Harry Bertoia Upholstered Small Diamond Lounge Chair for Knoll ( A )By Harry BertoiaLocated in Cincinnati, OHA very nice black wire framed small diamond lounge chair with matching black base . Having a full upholstered cover in a chocolate tone with soft woven fabric making the chair a very...Category
Mid-20th Century American Mid-Century Modern Lounge Chairs
MaterialsSteel
- Harry Bertoia Upholstered Small Diamond Lounge Chair for Knoll ( B )By Harry BertoiaLocated in Cincinnati, OHA very nice black wire framed small diamond lounge chair with matching black base . Having a full upholstered cover in a chocolate tone with soft woven fabric making the chair a very...Category
Mid-20th Century American Mid-Century Modern Lounge Chairs
MaterialsSteel