Charles and Ray Eames Rosewood DCM Chairs
View Similar Items
Charles and Ray Eames Rosewood DCM Chairs
About the Item
- Creator:Charles and Ray Eames (Designer),Herman Miller (Manufacturer)
- Design:
- Dimensions:Height: 29.5 in (74.93 cm)Width: 19.25 in (48.9 cm)Depth: 20 in (50.8 cm)Seat Height: 17 in (43.18 cm)
- Style:Mid-Century Modern (Of the Period)
- Materials and Techniques:
- Place of Origin:
- Period:
- Date of Manufacture:1960s
- Condition:Wear consistent with age and use. Very good condition with various surface scratches and wear.
- Seller Location:Atlanta, GA
- Reference Number:1stDibs: LU871814836212
DCM
During World War II, American designers Charles and Ray Eames (1907–78; 1912–88) worked with the United States Navy to make a new leg splint. Recognizing that metal splints could further injure a wounded person through the vibrations of their material, the couple created a new model with molded plywood. That wartime experience propelled the Eameses to continue their explorations in plywood. In 1946, they debuted the DCM, its shortened name referencing the “Dining Height (D) Side Chair (C) on Metal (M) Rod Base.”
The DCM was featured in “New Furniture Designed by Charles Eames” at the Museum of Modern Art, even though the pieces on view were the fruit of the highly collaborative process between Charles and his wife, Ray. In fact, the sculptural form of the DCM’s seat and separate back — which earned it the nickname “Potato Chip” chair — were largely influenced by Ray’s interest in abstract art, such as Alexander Calder’s mobiles and Joan Miró’s biomorphic forms. Inventive in its application of the plywood molding process for its birch material, the DCM is shaped to fit the sitter’s body. Its use of tubular steel is also worthy of note — an innovation that makes it look as if the plywood seat and back are floating in place. Rubber “shock” mounts allow the parts to be easily screwed together.
When it was brought to the mass market by Herman Miller in 1947, the DCM was an almost instant success for its lightweight portability and versatility. It is still among the most popular models produced by Herman Miller, exemplifying the Eameses’ influential legacy in modern living.
Charles and Ray Eames
Charles Eames and Ray Eames were the embodiment of the inventiveness, energy and optimism at the heart of mid-century modern American design, and have been recognized as the most influential designers of the 20th century.
As furniture designers, filmmakers, artists, textile and graphic designers and even toy and puzzle makers, the Eameses were a visionary and effective force for the notion that design should be an agent of positive change. They are the happy, ever-curious, ever-adventurous faces of modernism.
Charles (1907–78) studied architecture and industrial design. Ray (née Beatrice Alexandra Kaiser, 1912–88) was an artist, who studied under the Abstract Expressionist painter Hans Hofmann. They met in 1940 at the Cranbrook Academy of Art in suburban Detroit (the legendary institution where Charles also met his frequent collaborator Eero Saarinen and the artist and designer Harry Bertoia) and married the next year.
His technical skills and her artistic flair were wonderfully complementary. They moved to Los Angeles in 1941, where Charles worked on set design for MGM. In the evenings at their apartment, they experimented with molded plywood using a handmade heat-and-pressurization device they called the “Kazam!” machine. The next year, they won a contract from the U.S. Navy for lightweight plywood leg splints for wounded servicemen — they are coveted collectibles today; more so those that Ray used to make sculptures.
The Navy contract allowed Charles to open a professional studio, and the attention-grabbing plywood furniture the firm produced prompted George Nelson, the director of design of the furniture-maker Herman Miller Inc., to enlist Charles and (by association, if not by contract) Ray in 1946. Some of the first Eames items to emerge from Herman Miller are now classics: the LCW, or Lounge Chair Wood, and the DCM, or Dining Chair Metal, supported by tubular steel.
The Eameses eagerly embraced new technology and materials, and one of their peculiar talents was to imbue their supremely modern design with references to folk traditions. Their Wire chair group of the 1950s, for example, was inspired by basket weaving techniques. The populist notion of “good design for all” drove their molded fiberglass chair series that same decade, and also produced the organic-form, ever-delightful La Chaise. In 1956 the Eames lounge chair and ottoman appeared — the supremely comfortable plywood-base-and-leather-upholstery creation that will likely live in homes as long as there are people with good taste and sense.
Charles Eames once said, “The role of the designer is that of a very good, thoughtful host anticipating the needs of his guests.” For very good collectors and thoughtful interior designers, a piece of design by the Eameses, the closer produced to original conception the better, is almost de rigueur — for its beauty and comfort, and not least as a tribute to the creative legacy and enduring influence of Charles and Ray Eames.
The collection of original Eames furniture on 1stDibs includes chairs, tables, case pieces and other items.
- Four Mahogany and Caned Dining ChairsLocated in Atlanta, GASet of four mahogany and caned dining chairs, circa 1960s.Category
Vintage 1960s American Mid-Century Modern Dining Room Chairs
MaterialsMahogany, Cane, Wood
$3,500 / set - Mart Stam Cognac Leather and Chrome Dining Chairs for ThonetBy Thonet, Mart StamLocated in Atlanta, GASet of four Cantilevered Cognac leather and chrome dining chairs, designed by Mart Stam for Thonet, circa 1970s. They retain their war...Category
Vintage 1970s American Mid-Century Modern Dining Room Chairs
MaterialsMetal
- Selection of Warren McArthur ChairsBy Warren McArthurLocated in Atlanta, GASelection of Art Deco aluminum chairs, designed by Warren McArthur, American, circa 1930s. These can be used as dining, desk, or occasional cha...Category
Vintage 1930s American Art Deco Chairs
MaterialsMetal, Aluminum
$1,500 / item - Eames Aluminum Group Office ChairBy Charles and Ray Eames, Herman MillerLocated in Atlanta, GAEames Aluminum group chair, designed by Charles and Ray Eames for Herman Miller, American, circa 2008. Designed in 1958, this example is from 200...Category
21st Century and Contemporary American Mid-Century Modern Office Chairs ...
MaterialsMetal, Aluminum
- Arne Jacobsen Dining Chairs Set of Four by Fritz HansenBy Fritz Hansen, Arne JacobsenLocated in Atlanta, GASet of four Curvaceous series 7 dining chairs, designed by Arne Jacobsen for Fritz Hansen and retailed by Knoll, signed and dated, circa 2000. T...Category
Early 2000s Danish Mid-Century Modern Dining Room Chairs
MaterialsMetal
- Curvaceous Italian Brass or Bronze Dining Chairs Set of SixBy Gio PontiLocated in Atlanta, GASet of Six Curvaceous Italian Brass Dining Chairs, in the manner of Gio Ponti, Italy, circa 1950s. These chairs are currently being reuphols...Category
Vintage 1950s Italian Mid-Century Modern Chairs
MaterialsBrass
- Charles and Ray Eames DCM ChairsBy Charles and Ray EamesLocated in West Palm Beach, FLA set of 6 Eames DCM Chairs Walnut seats and backs Good Grain pattern 1970s productionCategory
Vintage 1970s North American Chairs
MaterialsWalnut
- DCM Chair by Charles and Ray Eames for Herman MillerBy Charles and Ray Eames, Herman MillerLocated in Los Angeles, CADCM chair (Dining metal chair) by Charles and Ray Eames for Herman Miller. Designed in 1946, this molded plywood + chromed ste...Category
Vintage 1950s American Mid-Century Modern Dining Room Chairs
MaterialsPlywood
- 16 DCM Chairs by Charles and Ray Eames for Herman MillerBy Charles and Ray Eames, Herman MillerLocated in Los Angeles, CADCM chair (Dining metal chair) by Charles and Ray Eames for Herman Miller. Designed in 1946, this molded plywood + chromed steel chair is a classic design. Sometimes referred to as the "potato chip chair...Category
Vintage 1950s American Mid-Century Modern Dining Room Chairs
MaterialsMetal
- Charles Eames DCM Dining ChairBy Charles and Ray Eames, Herman MillerLocated in Vienna, ATCharles Eames DCM dining chair with seat and back of molded walnut veneer, chromed steel. Designed by Charles and Ray Eames in 1946. Produced by Herma...Category
Vintage 1940s American Mid-Century Modern Dining Room Chairs
MaterialsSteel
- Herman Miller Fiberglass Chairs, Charles and Ray Eames, Olive Green, 1960'sBy Herman Miller, Charles and Ray EamesLocated in Round Rock, TXA wonderful set of four fiberglass armchairs designed by Charles and Ray Eames for Herman Miller. Offered in a rare olive green color that doesn't surface often. One of the most re...Category
Mid-20th Century North American Mid-Century Modern Dining Room Chairs
MaterialsSteel
- Charles and Ray Eames Red Beech DCM Chair, Herman Miller, Dining, Side ChairBy Herman Miller, Charles and Ray EamesLocated in Brooklyn, NYCharles and Ray Eames red beech DCM chair, Herman Miller, dining, side chair. Labeled. Designed in 1946. Produced in 2017. Authentic Eames chair for everywhere - a lovely complement to any dining room table or office, this chair’s curved plywood seat and back are designed to organically accommodate each sitter. They're connected to a light, streamlined steel frame with rubber shock mounts that flex to move with your body. The 1946 Eames DCM chair was the abbreviated name representing the dining height (D) side chair (C) on metal (M) rod base. The chair was part of a small series of chairs and tables which effectively kick started the career of Charles and Ray Eames into notoriety. History would soon coin the phrase ‘Eames Chairs’ largely based on the design and success of the first group of chairs including the DCM alongside the lounge version LCM as well as the wooden leg versions the DCW and LCW. The series were a result of a long-standing collaboration between Charles Eames and the Evans Plywood Company which had worked together, from the same location in Venice CA, throughout the war years. Eames molded plywood dining chair...Category
Mid-20th Century American Mid-Century Modern Dining Room Chairs
MaterialsStainless Steel
Recently Viewed
View AllRead More
The 21 Most Popular Mid-Century Modern Chairs
You know the designs, now get the stories about how they came to be.
A Guide to Herman Miller’s Most Iconic Furniture
The prolific manufacturer has partnered with many of the world’s top designers since opening its doors in 1923. Here are some of the company’s greatest hits, which helped transform the American home and office.