1980s Explosion Proof Aluminum Cargo Light Floor Lamp & Matthews Theatre Stand

An Ex British army festoon lamp shade and galvanized cantilever wall lamp with double wall fixing to allow a longer reach. We have fabricated a...

A large cast aluminium explosion proof pendant built to with stand the most adverse conditions at sea. These lamps were reclaimed from a super tanker that would have transported h...

Reclaimed, stripped, polished and modified 1970s Daeyang Electric Co. Ltd flame proof luminaire with fully updated electrics and fitted with four E26 filam...

Reclaimed and modified 1970s Daeyang Electric Co. Ltd flame proof luminaire with fully updated electrics and fitted with T8 Warm white LED tubes. The tube light has been fitted to a custom made tripod was comprises of 6 rigging screws to create the tripod base and spine, the tilt can be adjusted by a few degrees to allow the light lean back or stand more upright. The light has been cleaned back to its factory finish which is aqua marine and battle ship grey then lacquered to protect and give a gloss finish. The mains cable is sleeved with silver grey braid and has an onboard switch mounted on the opposite side to the cable entry. Daeyang strip lights were originally used in hazardous areas on large cargo ship and supertankers where dangerous gasses and flammable cargo may have been present, typically in cross loading areas, cargo bays and engine rooms. The cast aluminium chassis and toughened glass make an extremely robust fixture which has stood the test of time in the harshest of conditions. Flame proof light...

Eastern Bloc naval aluminium lamp reclaimed from decommissioned 1980's cargo ships. Professionally restored and rewired by hand in our workshop, ready to be reused in modern interiors or outdoor living spaces. This variant was originally a wall light which has been adapted into a table lamp, by adding domed feet, polished brass fasteners and mains cable with inline switch. Specifications: Width: 21cm Height: 21cm Depth: 21cm Weight: kg Lamp holder: E26 100v (with US colour coded wiring) or E27 220v We do not fit a wall plug as this lamp ships internationally, a suitable plug would need to be fitted These vintage industrial wall lights...

This is a Shonan Kosakusho daylight signalling lamp made in 1980 married with a military gyroscope tripod. Reclaimed from Mid-Century war ships, Shonan...

Vintage enamelled aluminum floor lamp, Italy, 1980s Excellently made halogen floor lamp in beige enamelled metal with directional diffuser with circular transparent glass disc, which...

1980s floor lamp in white metal and red, orange, green and blue plexiglass. Signature difficult to read (Joël Donjon ?), numbered 16/250.

A copper and aluminium floor lamp designed and produced in Italy, 1980s.

A pair of copper and aluminium floor lamps designed and produced in Italy, 1980s.

Postmodern geometric sculptural floor lamp rendered in spun aluminum base comprised of two intersecting cones with a suspended fabric shade, USA, 1980s.

Vintage floor lamp. Style: industrial. Production: 1980s.